|
|
QLYS6DZ “Dual-power” Hydraulic Wheeled Folded Boom Grabbing Crane “Dual-power” Hydraulic Wheeled Folded Boom Grabbing Crane is the renewal hydraulic grabbing crane based on autoMobilee crane. The working and driving of this crane are both finished in a control room in the upper part of crane, and also it can hoist 30％(when the main boom working) hoisting weight to drive and move. The moving, turning, hoisting, amplitude of variation and grabbing working of this grabbing crane are all oil-operated, which has stable performance and stepless velocity modulation. Fireproof electric machine and totally-enclosed type motor and circuit are safe when working in key fireproof institution. Fitted with different hydraulic grabber, the crane can load and unload, stack and unstuck to different raw material, such as coal, sand, grass, wood and wastepaper and so on, is the best choice of reservation of raw material to papermaking, cotton and wood industry. According to the concrete requirements of different clients, we produce electricity-operated crane, internal-combustion engine and “Dual-power” type operated by engine and electricity at the same time, can meet the requirements in different stock place. The concrete type as follows: QLYS represents internal-combustion engine, 380V electricity engine. “Dual-power” operated type (the upper part of crane control operation and driving). QLYD represents 380V electricity-operated crane(the upper part of crane control driving, the below part of crane control operation). QLY represents internal-combustion operated type crane(the upper part of crane control driving). |
 |
|
Main Technical Specifications Technical Data for Lifting Operation |
Type |
Item |
Unit |
Parameter |
||
Outline size |
Full length |
mm |
8814 |
||
Full width |
mm |
2827 |
|||
Full height |
mm |
3265 |
|||
Track |
Steering wheel |
mm |
1980 |
||
Driving wheel |
mm |
1800 |
|||
Wheelbase |
mm |
2800 |
|||
Power parmeter |
Power of Electric motor |
kW |
37 |
||
Power of Internal Combustion engine |
kW |
65 |
|||
Weight parameter |
Weight at travel state |
kg |
15100 |
||
Wheel loading |
Steering shaft loading |
kg |
6500 |
||
Driving shaft loading |
kg |
8600 |
|||
driving Parameter |
Max.driving speed |
km/h |
15 |
||
Min. Turning diameter |
mm |
13000 |
|||
Max. Climbing ability (30% lifting weight) |
% |
10 |
|||
Min.earth clearance |
mm |
250 |
|||
Approach angle |
° |
16.4 |
|||
Departure angle |
° |
16.4 |
|||
Braking distance |
mm |
≤6500 |
|||
|
Technical parameter of driving state |
Type |
Item |
Unit |
Parameter |
||||
Main parameter |
Max. Lifting weight |
t |
6 |
||||
Max. Lifting weight Amplitude |
mm |
3500 |
|||||
Max. Hoisting weight |
t |
3 |
|||||
Max. Lifting weight amplitude |
mm |
5000 |
|||||
Max.hoisting torque |
kN.m |
206 |
|||||
Max.Hoisting height（Shaft hole center of boom tip） |
Basic boom |
mm |
10000 |
||||
longest main boom |
mm |
11000 |
|||||
Outrigger distance |
longitude |
mm |
4400 |
||||
Cross direction |
mm |
4200 |
|||||
| Working performance chart of crane |
|||||||
Main boom angle |
Lifting of full retracting boom |
Lifting of full extending boom |
Hoisting |
|||
Hoisting weight |
Amplitude |
Hoisting weight |
Amplitude |
Hoisting |
Amplitude |
|
10 |
2.0 |
8.5 |
||||
20 |
2.0 |
8.5 |
4.3 |
4.6 |
||
30 |
2.2 |
8.2 |
4.8 |
4.1 |
||
40 |
2.4 |
7.6 |
1.6 |
9.1 |
6.0 |
3.3 |
50 |
2.8 |
6.8 |
1.8 |
8.3 |
6.0 |
2.5 |
60 |
3.0 |
5.7 |
2.2 |
7.0 |
||
70 |
3.0 |
4.5 |
2.8 |
5.6 |
||
Remark: Each rated hoisting weight include lifting hook and fittings weight |
||||||
|
Hoisting height curve |
 |
| Note: All specifications on our web-site are subject to technical modifications without notice. |