|
|
QLYS16HZ “Dual-power” Hydraulic Wheeled Straight Boom Grabbing Crane “Dual-power” Hydraulic Wheeled Straight Boom Grabbing Crane is the renewal hydraulic grabbing crane based on autoMobilee crane. The working and driving of this crane are both finished in a control room in the upper part of crane, and also it can hoist 30％(when the main boom working) Hoisting weight To drive and move. The moving, turning, hoisting, amplitude of variation and grabbing working of this grabbing crane are all oil-operated, which has stable performance and stepless velocity modulation. Fireproof electric machine and totally-enclosed type motor and circuit are safe when working in key fireproof institution. Fitted with different hydraulic grabber, the crane can load and unload, stack and unstuck to different raw material, such as coal, sand, grass, wood and wastepaper and so on, is the best choice of reservation of raw material to papermaking, cotton and wood industry. According to the concrete requirements of different clients, we produce electricity-operated crane, internal-combustion engine and “dual-power” type operated by engine and electricity at the same time, can meet the requirements in different stock place. The concrete type as follows: QLYS represents internal-combustion engine, 380V electricity engine. “Dual-power” operated type (the upper part of crane control operation and driving). QLYD represents 380V electricity-operated crane(the upper part of crane control driving, the below part of crane control operation). QLY represents internal-combustion operated type crane(the upper part of crane control driving). |
 |
|
Main Technical Specifications Technical Data for Lifting Operation |
Type |
Item |
Unit |
Parameter |
|||
Quality parameter |
Driving state quality（main boom） |
kg |
20800 |
|||
Wheel loading |
Front wheel loading |
7200 |
||||
Real wheel loading |
13600 |
|||||
driving Parameter |
Max.driving speed |
Internal Combustion engine |
km/h |
0~16 |
||
Electromator |
0~5 |
|||||
Min.turning radius |
m |
8 |
||||
Min.earth clearance |
m |
0.25 |
||||
Max.hoisting torque |
kN·m |
560 |
||||
Full length |
m |
6.05 |
||||
Full width |
2.72 |
|||||
Full height（Unsealing boomand hoisting support） |
3.10 |
|||||
Boom length |
12（or24） |
|||||
Max.Hoisting height |
10.7（or22.4） |
|||||
Wheelbase |
3.200 |
|||||
Wheelbase |
Steering wheel |
2.079 |
||||
Driving wheel |
1.880 |
|||||
Motivate parmeter |
Power |
Internal Combustion engine |
kW |
85 |
||
Electromator |
45 |
|||||
Type |
Internal Combustion engine |
YC6108G |
||||
Electromator |
YB225M-4 |
|||||
|
Technical parameter of driving state |
Type |
Item |
Unit |
Parameter |
||||
Main parameter |
Rated hoisting weight |
t |
16 |
||||
Min.Rated amplitude |
m |
3.5 |
|||||
Max.Hoisting height（Boom tip） |
Basic boom |
m |
13.5 |
||||
longest main boom |
25.5 |
||||||
Outrigger distance |
longitude |
m |
5.3 |
||||
Cross direction |
m |
4.8 |
|||||
Max.angle of atitude |
80° |
||||||
Min.angle of atitude |
0° |
||||||
Working speed |
Max.steering speed |
r/min |
3 |
||||
Amplitude time |
Fully raising boom |
Internal Combustion engine |
S |
≤45 |
|||
Electromator |
≤50 |
||||||
Fully falling boom |
Internal Combustion engine |
≤47 |
|||||
Electromator |
≤50 |
||||||
Lifting speed |
Couple pump |
Internal Combustion engine |
m/min |
≥70 |
|||
Electromator |
≥80 |
||||||
Outrigger extending and retracting time |
Horizon |
Extending simultaniously |
Internal Combustion engine |
S |
≤18 |
||
Electromator |
≤21 |
||||||
Retracting Simultaniously |
Internal Combustion engine |
≤14 |
|||||
Electromator |
≤16 |
||||||
Vertical |
Extending simultaniously |
Internal Combustion engine |
≤21 |
||||
Electromator |
≤25 |
||||||
Retracting Simultaniously |
Internal Combustion engine |
≤18 |
|||||
Electromator |
≤21 |
||||||
|
Working performance chart of crane |
Working amplitude |
Basic boom 12m |
Boom length 18m |
Boom length 24m |
|||||
Hoisting weight (T) |
Hoisting height(m) |
Hoisting weight (T) |
Hoisting height(m) |
Hoisting weight (T) |
||||
with outrigger |
without outrigger |
|||||||
with outrigger |
without outrigger |
with outrigger |
Hoisting height |
|||||
3.5 |
16.0 |
5.0 |
10.7 |
|||||
4.0 |
15.0 |
4.4 |
10.6 |
|||||
4.5 |
11.2 |
3.8 |
10.5 |
11.0 |
3.8 |
16.5 |
||
5.0 |
9.4 |
3.3 |
10.4 |
9.2 |
3.1 |
16.4 |
||
5.5 |
7.0 |
2.8 |
10.3 |
6.8 |
2.7 |
16.3 |
6.7 |
22.4 |
6.5 |
5.0 |
2.2 |
9.7 |
4.8 |
2.1 |
16.1 |
4.7 |
22.3 |
8.0 |
3.8 |
1.5 |
9.0 |
3.6 |
1.5 |
15.6 |
3.5 |
22.0 |
9.5 |
3.0 |
1.2 |
8.1 |
2.9 |
1.1 |
15.0 |
2.7 |
21.5 |
11 |
2.3 |
0.8 |
14.2 |
2.2 |
20.9 |
|||
12.5 |
1.9 |
13.1 |
1.8 |
20.2 |
||||
14.0 |
1.6 |
11.6 |
1.5 |
19.4 |
||||
15.5 |
1.2 |
18.4 |
||||||
17.0 |
0.9 |
17.2 |
||||||
|
Hoisting height curve |
 |
| Note: All specifications on our web-site are subject to technical modifications without notice. |