|
|
Motor Grader GR215 and Motor Grader GR215A |
|
■ GR215 Performance and characteristic.
■ New appearance design. ■The articulation frame is adopted and matched with the steering of the front wheel, with small turning radius, maneuvering and flexible. ■ The electro-hydraulic controls the power shift gearbox, with 6 ahead gear and 3 back gears. ■The international matching hydraulic parts are adopted, with reliable operation. ■The motions of the blade are fully hydraulic controlled. ■The rear axle is the three-section driving axle which is provided with the NO-SPIN self-locking differential machanism. ■The manipulation table and seats are adjustable . The arrangement of the manipulation handle and instruments are reasonable, with convenient application , and the comfort of driving is improved. ■The cab is grand and nice , with wide eyeshot and good sealing. ■The front bulldozing plate, rear scarification device, front scarification harrow and automatic leveling device can be added. ■ GR215A Performance and characteristic. ■ CUMMINS electronic control engine (Tier3), low noise , low emission. ■ ZF electronic and liquid control transmission , easy to operate. ■ Three portions drive rear axle, with NO-SPIN automatic and skid-proof differential, make transmission drive calmly and dependably. ■ Double loop brake hydraulic system, make it safety and dependabiliby. ■ ROPS & FOPS cab with electric washing window equipment, clear fog equipment and air-condition of the refrigeration and warm, automatic ventilation. ■ Pass CE attestation , accord ripper, back ripper, ball bearing circle, automatic horizontal system. |
Model |
GR215 | GR215A | |||
Basic specification |
Engine model |
CTAA8.3 6CTA8.3 |
QSB6.7 6CTA8.3 |
||
Rated power / speed |
KW / rpm |
153/2200 140/2200 |
164/2200 140/2200 |
||
Dimension (LxWxH ) |
mm |
8970x2625x3470 |
9180x2625x3470 |
||
Operating weight(Standard) |
kg |
16500 |
16100 |
||
Overall dimensions |
Travelling speed, forward |
km / h |
5,8,11,19,23,38 |
5,8,11,19,23,38 |
|
Travelling speed, reverse |
km / h |
5,11,23 |
5,11,23 |
||
Tractive force(f=0.75) |
kN |
87 |
115.3 |
||
Max.gradeability |
% |
20 |
30 |
||
Tire inflation pressure |
kPa |
260 |
260 |
||
Working hydraulic pressure |
MPa |
18 |
18 |
||
Transmission pressure |
MPa |
1.3-1.8 |
1.3-1.8 |
||
Operating specification |
Max.steering angle of front wheel |
° |
±50 |
±50 |
|
Max.lean angle of front wheels |
° |
±17 |
±17 |
||
Max.oscillation angle of balance box |
° |
±15 |
±15 |
||
Max.oscillation angle of balance box |
° |
±15 |
±15 |
||
Frame articulation |
° |
±27 |
±27 |
||
Min.turning radius using articulation |
m |
7.3 |
7.3 |
||
|
Blade |
Maximum lift above ground |
mm |
450 |
450 |
|
Maximum depth of cutting |
mm |
500 |
500 |
||
Maximum blade position angle |
° |
90 |
90 |
||
Blade cutting angle |
° |
28-70 |
28-70 |
||
Circle reversing rotation |
° |
360 |
360 |
||
Moldboard widthxheight |
mm |
4270x610 |
4270x610 |
||
| Note: All specifications on our web-site are subject to technical modifications without notice. |