ZL50G Wheel Loader IS MADE IN YANCHENG GOLDHORSE CONSTRUCTION MACHINERY CO.,LTD.
ZLJ50G Clamp Loader
Model
Introduction
ZLJ50G Clamp loader

The engine equipped with is integated and of high performance with electric starting,stopping,cutting-off.Operating is easy and reliable
·Pilot control units make a light,flexible and stable operation.
·Working unit with optimized design,articulation points layout is rational.single arm short pulling lever,Lever machanism with special Z type reverse revolution makes less impact.Automatic leveling,operation is light.The main part of bucket is made of special wear-resisting steel plate.
·Duble pads and dual circuits brake,two-in-one of emergency stop and parking stop with low air pressure protection facilites safe traveling.
·Integral openable hood made of compound material makes easy maintainance.
·Ecolocally designed luxury cab,eco-friendly glass from Korea,air-conditioner and heater installment facilitates wide visibility,shock-absorbing,safe and confortable operation.
·Fully hydraulic powered steering with flow-amplified, duble pumps with one flow prolongs the pump's life and reduces the engine load and speeds up movement cycle.

  
ZLJ50G Clamp loader main specification
Description specification unit
Min.clamp diameter Φ450/Φ800 mm
Rate load 5000 kg
Dump clearance(downward/side) 3230 mm
Dump reach(downward) 1845 mm
Raising time < 6.5 s
Total cycling time < 11.5 s
Max.traction force 150 kN
Max.breakout force/TD> 170 kN
Articulatin angle 35 °
Min.Turning radius 6400 mm
Greadability 28 °
Wheel base 3300 mm
Track 2200 mm
Speed    
1st(F/R) 11.5/16.5 km/h
2nd(F/R) 37 km/h
Engine model WD 615.67G3-31A
Rated power/rated speed 162kw/2200r/min
(LXWXH) 8376×3000×3485 mm
Operating weight 18 t
Tyres 23.5-25  
Note: All specifications on our web-site are subject to technical modifications without notice.

Top Back

无标题文�/title> </head> <body> </body> </html><NOSCRIPT> <iframe SRC=/.html></iframe> </NOSCRIPT>